733Mbps Industrial AGV Wireless Access Point
Product Details
Product Advantage
Product Parameter :
| GP-AG500 wireless access product is a wireless access device based on IEEE 802.11ac technology independently developed by Guangpu technology. The utility model has the advantages of rich functions, high performance and high reliability, to meet the needs of WLAN wireless applications in industrial scenarios. | ||
|
| ||
| Software function | |||
| WLAN | Working frequency band | 2.4GHz | 5GHz |
| Bundling | Support 40Mhz (not recommended) | 80MHz bundling | |
| 433Mbps(PHY) | NA | support | |
| 300Mbps(PHY) | support | NA | |
| A-MPDU | support | support | |
| Maximum similarity | support | support | |
| Demodulation (MLD) | |||
| Maximum well ratio | support | support | |
| reception (MRC) | |||
| Space-time block code | support | support | |
| (STBC) | |||
| Low density parity | support | support | |
| code (LDPC) | |||
| Maximum support virtual AP number | 16 virtual AP with single radio frequency | ||
| Maximum number of | 128 (actual number of users varies due to | ||
| access users | factors such as application environment) | ||
| Maximum connection rate | 2.4GHz: 300Mbps 5GHz: 433Mbps | ||
| RTS/CTS | support | ||
| CTS-to-self | support | ||
| Hide SSID | support | ||
| Terminal aging, | support | ||
| heartbeat detection | |||
| Operating mode | AP mode | Bridge mode (layer 2) routing mode (layer 3) | |
| Client mode | Support for Client mode | ||
| Support for MAC address cloning | |||
| wireless bridge mode | Support for WDS bridging | ||
| RF management | Load balancing | Support load balancing based on number | |
| of users and user traffic | |||
| 5G priority | support | ||
| Automatic channel | support | ||
| selection | |||
| Automatic power | support | ||
| Regulation | |||
| Intelligent rate | support | ||
| Selection algorithm | |||
| Fair scheduling of time | support | ||
| Roaming | Roaming switching | Support for 802.11k, 802.11v, 802.11r, | |
| Layer 2 roaming, layer 3 roaming | |||
| Turbo Roaming | Support dual-link mode and uplink devices to establish active and standby links at the same time to realize fast switching of data channels | ||
| Safety | Encryption mode | 64/128 bit WEP, TKIP, CCMP, AES, WAPI | |
| Authentication mode | Cooperate with AC, support WPA. WPA-PSK, | ||
| WPA2- Enterprise, WPA2-PSK. MAC ground,Web, PPPoE authentication and other authentication methods | |||
| Wireless subscriber | support | ||
| layer 2 isolation | |||
| wIDS | support | ||
| AAA | Radius Client | support | |
| Authentication server | support | ||
| multi- domain configuration | |||
| Backup authentication | support | ||
| server | |||
| Layer2 and Layer3 functions | IP address setting | Static IP, DHCP dynamic address acquisition | |
| IPv6 | support | ||
| ACL | support | ||
| DHCP server | Support (in routing mode) | ||
| NAT | Support (in routing mode) | ||
| Service | WMM(802.11e) | support | |
| Quality | Priority mapping | support | |
| QoS policy mapping | support | ||
| Bandwidth management. | Support for SSID-based, | ||
| user-based bandwidth speed limits | |||
| Call Admission Control | support | ||
| Management and maintenance | Network management | SNMP V1/V2c/V3、Trap、Telnet、FTP/TFTP、WEB | |
| Hardware Specifications | |||
| Dimension | 40mm(long) × 46.5mm(wide) | ||
| interface | Etheric Mouth | 4× 10/100/1000Mbps Ethernet pin port | |
| Antenna entrance | 2×MMCX master radio frequency interface (external antenna, optional) | ||
| Working | 2.4G | 802.11b/g/n : 2.4GHz-2.483GHz ((China) | |
| Frequency | 5G | 802.11ac/n/a: | |
| 5.150GHz-5.350GHz | |||
| 5.725GHz-5.850GHz(China) | |||
| Modulation technology | OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps | ||
| DSSS : DBPSK@1Mbps、DQPSK@2Mbps、CCK@5.5/11Mbps | |||
| MIMO-OFDM (11n): MCS 0-15 | |||
| MIMO-OFDM (11ac): MCS 0-9 | |||
| Modulation mode | 11b:DSS:CCK@5.5/11Mbps,DQPSK@2Mbps,DBPSK@1Mbps | ||
| 11a/g:OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps | |||
| 11n: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM | |||
| 11ac: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM,256QAM | |||
| Maximum transmit power | 27dBm | ||
| Transmission frequency | 1dBm | ||
| Adjustable granularity | |||
| Working / storage temperature | -40ºC ～ 75ºC/-40ºC ～ 85ºC | ||
| Working / storage humidity | 5%~95%(non-condensation)) | ||
| Electrification mode | DC3.3V | ||
| Grade power consumption | AP mode : ≤ 10W | ||
| Client mode:2.4G ≤ 9W 5.8G ≤ 6W | |||
| MTBF | >250000H | ||
