Home > Industrial > Related Accessories > Feeder

GP-FC-3 50-3 serie Low Loss Patch Cord Extension Cords


Product Details

Product Advantage

    Feeder cables, also known as feed lines or transmission lines, are used in telecommunication and RF (Radio Frequency) systems to transmit signals from the antenna to the main equipment or distribution points. They serve as the primary transmission medium for RF signals.

    The main function of feeder cables is to transport high-frequency signals, such as radio signals, from the signal source (e.g., base station or antenna) to the receiving equipment. They ensure efficient signal transmission and minimize signal loss.

    * Ultra low loss
    * Low transmission delay
    * Expanded polyethylene insulation
    * Minimum attenuation

Product Parameter :

Performance

Direct-current resistance

Internal conductor: 24 Ω / km

External conductor: 13.50 Ω / km

Insulation resistance

5000 MΩ*km

Dielectric strength

1.6KV

Rate

81%

Characteristic impedance

50±2

(SWR) 2000MHz

≤ 1.2

Sheath pressure

1000V(DC)

Sparkover voltage

5000V(DC)

Capacity

81pF/m

Maximum attenuation dB / 100m

2000MHz

49.5

2100MHz

50.4

2400MHz

54

3000MHz

61.5

Structure

Inner conductor

1.02mm

Insulation

3.0mm

Outer conductor

3.7mm

Cover layer

5.0mm

Selection

GP-FC10-SJ-NJ-3

SMA Internal thread inner Needle to Type N

FC10~FC500 0.1 m ~ 5 m

GP-FC10-SJ-NK-3

SMA Internal thread inner Needle to Type N female seat

FC10~FC500 0.1 m ~ 5 m 

Dielectric strength

GP-FC10-SJ-NKKF-3

SMA Internal thread inner Needle to Type N flange female seat with mounting screw holes

FC10~FC500 0.1 m ~ 5 m

GP-FC10-SJ-SJ-3

SMA Internal thread inner Needle to SMA Internal Thread Needle

FC10~FC500 0.1 m ~ 5 m

GP-FC10-SJ-SKKF-3

SMA Internal thread inner Needle to SMA flange female seat with mounting screw holes

FC10~FC500 0.1 m ~ 5 m

GP-FC10-RPSJ-SKKF-3

SMA Internal thread hole head to SMA flange female seat with mounting screw holes

FC10~FC500 0.1 m ~ 5 m

GP-FC10-RPSJ-NJ-3

SMA Internal thread hole head to Type N

FC10~FC500 0.1 m ~ 5 m

GP-FC10-RPSJ-NK-3

SMA Internal thread hole head to Female Type N

FC10~FC500 0.1 m~ 5 m

GP-FC10-RPSJ-NK-3

SMA Internal thread hole head to Type N flange female seat with mounting screw holes

FC10~FC500 0.1 m ~ 5 m

GP-FC10-RPSJ-RPSJ-3

SMA Internal thread hole head to SMA internal thread hole head

FC10~FC500 0.1 m ~ 5 m




GPSENKE © All Rights Reserved.
Products purchased in Australia are sold and fulfilled by You and Tech Pty Ltd